6
Unpacking
Unpacking Process (S1500, V1500, & S3000i)
1. Inspect the shipping box for any damage. If you notice any
damage please contact us at [email protected].
2. With assistance, place the subwoofer upside down, so the UP
arrows are pointing at the ground.
3. Carefully cut the tape on the bottom (now facing up) of the box
with a knife or other sharp object. Be very careful not to cut too
deep because you will damage the bottom of the subwoofer.
4. Fold back the cardboard fl aps so the bottom of the enclosure
is completely exposed. You can leave the foam corners in
place if you prefer.
5. With assistance, rotate the shipping box so the open side of
the box is now facing the fl oor. Make sure to keep the card-
board fl aps folded back so they do not end up under the
subwoofer.
6. With assistance, lift straight up on the shipping box to reveal
your subwoofer.
7. Remove the plastic bag.
8. Remove and retain the foam packaging, the plastic covering,
and the shipping box.
9. Visually inspect the subwoofer for any damage. If you notice
any damage please contact us at support@powersoundaudio.
com.
Unpacking Process ( Freight shipments )
1. Inspect the shipping box for any damage. If you notice any
damage please contact us at [email protected].
2. Carefully cut the straps that secure the subwoofer to the pallet.
3. With assistance, lift straight up on the shipping box to reveal
your subwoofer, then remove the grill box and manual bag.
4. With assistance, lift your subwoofer out of the shipping box
and place it on a carpeted fl oor or blanket to prevent damage.
5. Remove the plastic bag.
6. Remove and retain the foam packaging, the plastic covering,
and the shipping box.
7. Visually inspect the subwoofer for any damage. If you notice
any damage please contact us at support@powersoundaudio.
com.
Summary of Contents for S1500
Page 1: ...S1500 S3000i V1500 USER GUIDE SUBWOOFERS ...
Page 6: ...7 Notes ...
