6
Always fill in no less than 0.5
liters of water but no more
than 0.6 liters. Too less water
can overheat the device. Even
tough there is a dry-run-
protection, take care not to use
too less water.
If there is too much water u-
ser, it could spray out when
boiling.
To prevent internal heat
buildup, do not cover the unit
while operating.
Risk of exiting water vapor
Danger of scalding by touching ascen-
ding steam!
Keep your face and hands off the
steam valve output. Hot steam
exits during the operation.
Risk from hot parts of the appliance
Risk of burns from touching hot parts!
The pot is getting very hot
during operation. Take care to
touch it at the handle only.
The heating pipe cools down
slowly. Don‘t touch it right af-
ter a preparation.
Risk due to defective or improper parts
Electric shock through the use of a de-
vice with defective or unsuitable parts!
Risk of scalding from escaping hot wa-
ter from a broken water tank!
Do not take the device into ope-
ration, when jug, top control unit
or power cable show visible da-
mage.
Use the top part of appliance
only with the designated jug.
Never manipulate the contact
protection, which allows a func-
tion only with safely closed top.
Take basically no modifications
to the product.
Setting up and connection conditions
Fire hazard by overloading the power
supply!
Connect the unit only to a pro-
perly installed socket with pro-
tective contacts on whose mains
voltage corresponds to the spe-
cifications of the device.
Do not use an extension cord or
multiple socket.
