background image

1

Questions, problems, missing parts?

 Before returning to your retailer, call our customer 

service department at 1-800-791-9458.

ATTACH YOUR RECEIPT HERE

Serial Number

Purchase Date

MODEL #DB5006

9 AMP ELECTRIC SNOW THROWER

2

PRODUCT SPECIFICATIONS

TABLE OF CONTENTS

Safety Information ...........................................................................................................................  5

Package Contents ...........................................................................................................................  3

Hardware Contents .........................................................................................................................  4

Preparation  .....................................................................................................................................  7

Assembly Instructions .....................................................................................................................   8

Operating Instructions ....................................................................................................................  11

Care and Maintenance ..................................................................................................................   14

Warranty  .......................................................................................................................................   14

SPECIFICATIONS

Voltage: 120 V, 60 Hz

Input power: 9 Amp

Rotation speed: 2,100 RPM

Plow width and depth: Approx. 30 cm x 10 cm (12 in. x 4 in.)

Max. spraying distance: 3 m (10 ft.)

Net weight: 5.7 kg (12.5 lbs.)

PACKAGE CONTENTS

3

A

J

I

B

D

N

K

E

F

G

C

L

M

   PART                 DESCRIPTION                       QUANTITY

A

B

C
D

E

F

G

1
1
1
1
1
1
1

Polarized plug (preassembled)
 Main handle
 Switch button (preassembled)
Trigger (preassembled)
Cord lock (preassembled)
Handle fastener
Main pole

   PART                 DESCRIPTION                       QUANTITY

H

I

J

K

L

M

N

1
1
1
1
1
1

Auxiliary handle
Joint fixing knob
Telescopic pole
Handle support
Main cover (preassembled)
Auger (preassembled)
Auxiliary handle knob

H

HARDWARE CONTENTS

4

AA

BB

CC

DD

EE

Phillips

Screwdriver

Qty. 1

ST4.8 x 20

Screw

Qty. 2

M5

Nut

Qty. 1

M5 x 12

Screw

Qty. 1

Ф5 × Ф12 × 1

Washer

Qty. 1

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the 

product.

5

Work Area

Keep work area clean and well-lit. Cluttered, dark areas invite accidents.

Do not operate snow thrower in an explosive atmosphere, such as in the presence of flammable 

liquids, gases, or dust. Electrical appliances create sparks that may ignite the dust or fumes.

Keep children, pets, and bystanders away from work area. Be aware that the normal noise of the 

machine when turned on may make it difficult for you to hear approaching people.

Electrical Safety

Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor 

plugs with grounded appliances. Unmodified plugs and matching outlets will reduce risk of electric 

shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and 

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

Do not abuse the cord. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or 

entangled cords increase the risk of electric shock. Never carry the snow thrower by its cord or 

yank the cord to disconnect it from the electrical outlet.

Replace or properly repair damaged cords. If cord is damaged in any manner while plugged in, pull 

the extension cord from the wall receptacle.

Contact with water while operating the snow thrower can result in electric shock and serious bodily 

injury. Do not use the snow thrower in damp or wet locations or expose to rain. Do not handle the 

plug or the appliance with wet hands or while standing in water.

Extension Cord - WARNING - Only use a UL-rated extension cord for OUTDOOR, all-weather use 

(usually orange color). To prevent the extension cord from disconnecting during operation, tie it 

around the top right side of the middle frame before connecting it to the snow thrower as shown in 

Figure 2 on page 11. 

Turn off the power switch and disconnect the power cable before inspecting, servicing, repairing, or 

cleaning the snow thrower. Any such operation should be performed after revolving parts inside the 

snow thrower stop completely.

Do not move or transport the snow thrower when the plug is connected to the power socket and the 

switch is turned on.

Personal Safety

Stay alert - Watch what you are doing and use common sense when operating the snow thrower. 

Do not use the machine when tired, ill, or under the influence of drugs, alcohol, or medication. A 

moment of inattention may result in serious personal injury.

Wear proper clothing - Wearing rubber boots offers additional protection from electric shock. Do not 

wear loose clothing or jewelry that may become caught in the machine. Wear protective headgear 

to keep hair away from revolving parts of the machine. Safety glasses offer better protection than 

everyday eyeglasses.

Moving parts present risks - Keep your face, hair, clothing, hands and feet away from moving parts. 

All guards and safety attachments must be installed properly before using the unit. Shut off and 

disconnect cord before touching any parts other than the handles and switch.

Surfaces - This snow thrower is intended for use on paved surfaces. Do not use on gravel, stone, 

or other unpaved surfaces unless the snow thrower is adjusted for such surfaces according to the 

instructions given in the operator’s manual.

Avoid accidental starting - Make sure the switch is in the off position before plugging in the unit. Do 

not carry the snow thrower with your finger on the switch.

Body position - Maintain proper footing and balance at all times. Place heels firmly on the ground 

and tightly grasp the handle bar. Watch for uneven surfaces and do not overreach. In case you fall 

or collide with the snow thrower, inspect the unit for damage. When stepping backwards, be 

careful to avoid obstacles beneath your feet or behind you to avoid falling.

Snow thrower Use and Care

Know your snow thrower - Familiarize yourself with the main parts of your snow thrower.

Read the operator’s manual carefully. Learn your snow thrower’s applications and limitations as 

well as the specific potential hazards related to this machine. Do not use this machine for any 

purpose other than the one for which it was designed. Otherwise, it may cause mechanical 

defaults, serious damage or personal injury.

Preliminary unit inspection - Thoroughly inspect the unit before use. Make sure all the parts are 

secure and installed correctly. If you notice any abnormalities, do not use the machine until it has 

been properly repaired. Always perform a test run the first time you use the snow thrower or after 

replacing parts to ensure that the unit is functioning properly.

Preliminary area inspection - Clear the area to be plowed before each use. Remove all objects 

such as rocks, broken glass, nails, wire, or string, which can be thrown by or become entangled in 

the snow thrower. Keep the area of operation clear of other people and pets.

Excessive force - The snow thrower was designed to respond at a certain rate for various snow 

conditions for optimum safety and performance. Do not force it; keep pressure constant.

Malfunctioning switch - Do not use the snow thrower if the switch does not turn it on and off. Any 

electrical appliance that cannot be controlled by the switch is not safe to use and must be repaired.

Hitting an object - If the snow thrower accidentally strikes an object, stop the snow thrower; inspect 

for damage; repair or replace any damaged part before restarting and operating the snow thrower.

Discharge chute safety - Never direct the snow discharge chute at the operator, at bystanders, at 

vehicles or at windows. Thrown snow and foreign objects accidentally picked up by the snow 

thrower can cause serious damage and personal injury. Do not use your hands to unclog the 

discharge chute. Stop the motor before removing debris.

Abnormal operation - If you notice the snow thrower running in an unstable state or hear abnormal 

sounds from the engine, stop the machine, disconnect the power immediately, and contact your 

original distributor.

Noise control - When using the snow thrower, you must respect local laws and regulations 

regarding noise control and environmental protection. To avoid noise disturbance, you should 

carefully decide upon an appropriate operation time and consider the surrounding conditions.

When work is completed - Disconnect the snow thrower from the power source when not in use, 

when changing accessories, and before performing any maintenance.

Store safely - Store snow thrower indoors in a dry area between uses. Keep in a locked area 

where children and unauthorized users cannot gain access. Do not store the machine while it is 

still connected to the power source. It may cause damage and injury.

Maintain for safety and longevity - Check for misalignment or binding of moving parts, breakage of 

parts, and any other conditions that may affect the unit’s operation. If damaged, repair or replace 

the damaged part before use. Use only those replacement parts made for your model. When 

replacing any parts, you must strictly observe the instructions and procedures described in this 

manual. Special care should be paid to any rubber parts, since these parts may increase the 

engine load and decrease its mechanical power if damaged.

6

SAFETY INFORMATION

7

CAUTION

Inspect wiring, which, if damaged during shipping, may cause serious bodily injury during 

equipment use. If any damage is seen or suspected, do not assemble. Instead, contact our 

customer service department at 1-800-791-9458.

Handle with care during assembly so that electrical wiring does not become damaged.

PRODUCT LABELS

WARNING - Read, understand and follow all safety labels and markings on the unit.

Before beginning assembly of product, make sure all parts are present. Compare parts with package 

contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble 

the product.

Estimated Assembly Time:

 

5 minutes

Tools required for assembly (included): Phillips screwdriver

PREPARATION

SAFETY INFORMATION

 

 

ASSEMBLY INSTRUCTIONS

8

1.  Align the slot on the main pole (G) with the track on 

     the main handle (B).

1

2

2.  Turn around the main handle and insert the main pole 

     (G) into the main handle (B), making sure that the tab 

     on the main handle (B) is inserted into the hole on the 

     main pole (G).

3.  Turn the handle fastener (F) clockwise to secure the 

     connection between the main handle (B) and main 

     pole (G).

3

G

B

G

B

G

F

B

tap

hole

ASSEMBLY INSTRUCTIONS

9

5

5.  Pull the main cover connector out of the main cover 

     (L). Push to snap together the connector on the handle 

     support (K) to the main cover connector; only one 

     position is possible, and they should fit together 

     without forcing.

6

6.  Line up the grooves in the handle support (K) with the 

     grooves in the main cover (L) and slide together until 

     interlocked.

K

L

L

K

4

4.  Insert the M5(CC) nut into the slot inside the Handle 

Support

K

, making sure the nut is fully inserted.

Hardware Used

cc

x 1

M5  Nut

  

CC

K

ASSEMBLY INSTRUCTIONS

10

8.  Loosen the knob (N) of the auxiliary handle (H). 

     Move the auxiliary handle (H) to a position that is 

     comfortable to you and tighten the knob (N).

8

9.  Loosen the joint fixing knob (I) on the main handle (B). 

     Set the pole to a position that is comfortable to you by 

     sliding the main handle (B) to the desired height. 

     Tighten the knob (I).

9

H

N

I

B

7

7.  Locate two screws (AA). Insert the first screw (AA) 

     into the hole in the handle support (K) and tighten it 

     with the screwdriver (BB). Insert the second screw 

     (AA) into the other hole and tighten. Insert the 

     washer (EE) and the screw (DD) into the auger 

     housing and tighten the screw.

Hardware Used

AA

x 2

ST4.8 x 20  Screw

  

BB

x 1

Phillips  Screwdriver

  

EE

DD

AA

DD

x 1

M5 x 12  Screw

  

EE

x 1

Ф5 

x

 Ф12 

x 1  Washer

  

OPERATING INSTRUCTIONS
Note:

 Before using this machine, make sure that the power source you will use complies with the 

specifications detailed in this manual. Before inserting the plug into the socket, verify that the snow 

thrower’s auger and scraper are firmly attached with screws. Perform a test run to ensure that the 

rotor turns freely.

SECURING THE EXTENSION CORD

11

WARNING

Electric shock may cause SEVERE INJURY or DEATH. Heed these warnings:

Do not allow any part of snow thrower to make contact with water while powered on. If the 

appliance becomes wet while turned off, wipe dry before starting.

Use only a UL-rated extension cord for outdoor, all-weather use. Do not use an extension cord 

more than 150 feet (46 meters) long.

Don’t touch the appliance or its plug with wet hands or while standing in water. Wearing rubber 

boots offers some protection.

EXTENTION CORD CHART

2. To prevent the extension cord from disconnecting 

    during use, tie the female end of the extension cord 

    into a loose knot on the cord lock (E) before connecting 

    to the male plug in the socket of the snow thrower.

3. Note that the snow thrower has a polarized male plug

    (A), with one prong in the socket slightly longer and 

    wider than the other. The extension cord female end 

    should be likewise polarized, so that the extension 

    cord fits snugly into the socket.

2

3

C

Cord length is:    Up to 100 ft. (30 m)    100-150 ft.(30 m-46 m)

Wire gauge is:                 16                                  14

1. For safe and efficient use of your snow thrower, use only a UL-rated extension cord 

    recommended for outdoor use. Refer to the Extension Cord Chart below.

A

E

POWERING ON AND OFF

12

Damaged electrical cords present risk of fire, electric shock, and serious bodily injury.

Before operating the snow thrower, carefully examine the electrical cord. If the cord is damaged, do 

not use the snow thrower. Replace or repair the damaged cord immediately. If you need assistance, 

contact our customer service department at 1-800-791-9458.

1. To power on, first press the switch button (C) on the 

    side of the hand grip and follow by squeezing the 

    trigger (D). Reverse operation cannot start the machine.

2. To power off, release your grip on the trigger (D).

1

OPERATING INSTRUCTIONS

WARNING

D

C

13

MOVING THE MACHINE AND PLOWING THE SNOW

Foreign objects, such as rocks, broken glass, nails, wire, or string, can be picked up and 

thrown by the snow thrower, causing serious personal injury.

Remove all foreign objects from the area to be plowed before operating the snow thrower.

OPERATING INSTRUCTIONS

WARNING

Keep the area of operation free of foreign objects that can become thrown by the rotor blades.  

Perform a thorough inspection of the area since some objects may be hidden from view by 

surrounding snow. If the snow thrower hits an obstruction or picks up a foreign object during use, 

stop the snow thrower, disconnect the extension cord, remove the obstruction, and inspect the unit 

for damage. Repair or replace any damaged part before restarting and operating the unit.

Keep children, pets, and bystanders away from the area of operation. Be aware that the normal 

noise of the machine when turned on may make it difficult for you to hear approaching people.

Note wind direction. If possible, move in the same direction as the wind so that the snow is not 

thrown against the wind (and thus back into your face and back onto the path).

While moving the snow thrower, do not drag the power cable violently or roughly. The snow thrower 

should move within the range that the cable can reach.

Do not push the snow thrower with excessive force. You should push the machine gently and 

evenly in accordance with the unit’s throw rate.

Do not apply additional man-made load to the engine since this may cause engine damage.

Some parts of the snow thrower may freeze under extreme temperature conditions. Do not attempt 

to operate the snow thrower with frozen parts. If the parts freeze while the snow thrower is in use, 

stop the snow thrower, unplug the extension cord, and inspect for frozen parts. Free all parts 

before restarting or operating the snow thrower. Never force controls that have frozen.

Working on pebbles, gravel, or unpaved surfaces - To avoid throwing loose surface material along 

with the snow, push down on the handle to raise the scraper at the base of the unit above the 

pebbles or gravel.

Run the snow thrower for a few minutes to melt away any snow on the snow thrower. Turn the 

snow thrower’s power off.

Disconnect the extension cord from the snow thrower.

Examine the extension cord thoroughly for signs of wear or damage. Replace it if it is worn or 

damaged.

Examine the snow thrower thoroughly for worn, loose bolts or damaged parts. For repairing or 

replacing parts, contact customer service.

Store the extension cord with the snow thrower.

Store the unit in a locked and dry or high and dry place to prevent unauthorized use/damage and 

keep out of the reach of children. Store the instruction manual along with unit for future use.

CARE AND MAINTENANCE

Make sure to turn off the switch and disconnect the extension cord before performing any 

maintenance task on your snow thrower.

WARNING

14

WARRANTY

TWO YEAR WARRANTY 

For two years from date of retail purchase within U.S.A., the manufacturer will, at its option, repair or 

replace, for the original purchaser, free of charge, any part or parts found to be defective in material 

or workmanship. This warranty covers units which have been operated and maintained in accordance 

with the owner’s instructions furnished with the unit, and which have not been subject to misuse, 

abuse, commercial use, neglect, accident improper maintenance or alteration. 

Personal use: THE FOREGOING PARAGRAPHS CONSTITUTE THE MANUFACTURER’S ENTIRE 

WARRANTY WITH RESPECT TO ANY PRODUCT PURCHASED AND USED FOR PERSONAL 

FAMILY, HOUSEHOLD/RESIDENTIAL PURPOSES, AS DISTINGUISHED FROM COMMERCIAL 

USAGE.

Commercial use: ALL APPLICATIONS OTHER THAN PERSONAL USE AS OUTLINED ABOVE, ARE 

CONSIDERED COMMERCIAL USAGE.

How to Obtain Service: If you need service, call our customer service department at 1-800-791-9458.

Other Warranties: All other warranties, express or implied, including any implied warranty of 

merchantability is limited in its duration to that set forth in this express limited warranty. The 

provisions as set forth in this warranty provide the sole and exclusive remedy of the manufacturer's 

obligations arising from the sale of its products. The manufacturer will not be liable for incidental or 

consequential loss or damage. Some states do not allow exclusions of incidential or consequential 

damages, so the above exclusions may not apply in all states. This warranty gives you specific legal 

rights in your state, which vary from state to state.

Printed in China

Summary of Contents for DB5006















Reviews: