40
Englis
h
3
Turn the engine's ignition key to "ON" and then to "START", release once the
engine has started.
NOTE:
IF the engine does not start up within 3 or 4 seconds, release the
ignition switch and wait for a few seconds before trying again to avoid overheating
the ignition switch.
4
Once started, wait for a few seconds and introduce the choke completely (open
air position).The engine will begin working stably and is ready to have equipments
plugged in.
.
NOTE:
Do not leave the choke in an intermediate position, the blend would be
too rich and the engine would not work properly.
During the first startup of the machine the battery's charge may be low if stored for
too long. If you notice the charge is not enough, charge the battery with a slow
charge charger.
CHOKE
