REAR WHEELS
Your wheels are made of injection molded nylon and will not rust. They are also fitted
with sealed precision bearings (7) which require no lubrication. However they may
need occasional adjustments, due to wear under normal use. Too much side play or
looseness or squeaking from your wheel means it needs to be checked. In most cases,
tightening of the axle bolt (2) will rectify this condition. Should squeaking of
looseness continue to exist after adjustment, the bearings might have to be changed.
See your servicing dealer for assistance.
#
Description
Quantity
1
Wheel
2
2
Axle Bolt
2
3
Axle Receiver
2
4
Axle Plate
2
5
Axle Receiver
Nut
2
6
Hub Cap
2
7
Precision
Bearing
4
3
4
5
7
2
6
1
7
To Adjust:
Remove hub cap (6) to access the axle bolt (2), then simply loosen and remove the
axle bolt (2). This allows you to remove the rear wheel. To adjust your seat height, the
axle receiver (3) and the axle receiver nut (5) needs to be loosen and removed. Once
you select your desired seat height, place the axle receiver (3) and the receiver nut (5)
in the corresponding position on the axle plate (4). Tighten the axle receiver (3) and
axle receiver nut (5) securely back on the axle plate (4). Place the axle bolt (2)
through the rear wheel and tighten back to the axle receiver (3). Then place the hub
cap (6) on to protect the axle bolt (2).
Rear wheel
Summary of Contents for GLYDER
Page 1: ......