LEGREST
Your legrest is designed to be removed and replaced the same as
your footrest. However, it is advisable to remove and replace your
legrest while it is in a down position. Lifting on the footplate
raises the legrest and it will automatically lock at the raised
position.
1
2
3
4
5
6
7
8
9
1 – Locator Pin
2 – Front Post
3 – Locking Pin
4 – Locking Bushing
5 – Release Handle
6 – Elevating Trigger
7 – Calf Pad Height Adjustment
8 - Leg Length Adjustment Screw
9 – Leg Rest Height Extension Tube
Operating Your Legrest
Locate 1 into 2 and swing into place. This should allow 3 to lock
into place with 4. (Make sure your legrest is locked into place
before using. To remove footrest, press 5 swing away and lift
legrest upwards. To raise legrest lift 9 to desired height. To lower
legrest, pull 6 upwards. Use 7 to raise or lower calf pad height. To
adjust leg length height, remove 8, slide 9 to desired height and
lock 8 back into place.
* For low floor to seat height on chair, shorter leg rest height
extension tube is required.
Summary of Contents for GLYDER
Page 1: ......
