www.powermaxfitness.net
9
5.
Put the massager supporting frame on the rail, and the tighten with screw M8*35 and nuts
(Please notice the direction).
6.
Remove the three M8*15 screws, spring pads and flat washers from the massager, then use
them to lock the massager on the massager frame.
7.
Put the safety key on the picture showing yellow area, then press the start button to start the
treadmill. (Notice: The treadmill can only starts when the safety key is put on the yellow area
on the console.)
NOTE:
please confirm that all screws are locked uniformly according to the requirements after
installation, and check no part is left out before plugging electricity.
M
8
*
35
M8*15