www.powermaxfitness.net
8
3.
Hold left& right columns, use 6# hexagon wrench and screw M8*25 to lock the console frame
on the columns (Tighten all screws in above steps, and please notice not to clamp the cable
by column).
4.
Use the knob in step one to lock the main base and columns (Rotate clockwise, please refer
to the arrow point direction). Uneven ground may cause trouble when rotate the knob, please
lift the column slightly to left side (as shown below).In order to fold the machine easily next
time, please don’t rotate the knob too tight.
Above are steps of single function installation, multifunctional machines need to be installed
after you complete the steps above and then continue with the following installation:
M8*2
5
