INTegral Line-Interactive Uninterruptible Power Supply Unit
—650 VA
Power Innovations
9
3—Installing Systems
3.1—Placing Systems Correctly
3.1.1
—Environmental Concerns
Install the system with the correct side facing up and on a level, even surface.
The
INTegral
will work its best if installed in a dry environment out of rain, snow, wind, and direct sunlight.
Clutter, flammable gases, and corrosive liquids may damage the unit or even constitute severe operating hazards.
Table 1: Correctly Placing the System
Cautions
Never place this system:
Upside down or on an incline.
In direct sunlight or weather.
Near any source of natural or artificial heat.
With less than 1” in. of ventilation room on all sides with visible ventilation holes.
Avoid locations where the system:
Could be exposed to flammable gases or corrosive liquids.
Will be cooler than 32°F (0°C) or hotter than 104°F (50°C).
Will be exposed to clutter or objects that could block ventilation openings.
Cannot ventilate.
Environment
Ideal Placement
Avoid
Surface Grade
Level Surface
Incline
Heat
Far from direct solar or
artificial heat
Heat sources or direct sunlight
Temperature
32
–104 °F (0–50 °C)
Location cooler than 32 °F (0
°
C
)
or hotter than 104 °F (50°C)
Ventilation Space
Space around system
Tight spaces
Cleanliness
No dust or clutter
Dusty or cluttered places
Orientation
Right side up
Upside down or on its side
