Power Fist 9049107, Manual

Page: 10 / 32

12. Switch the polisher OFF, then remove the polisher from the workpiece.
13. Remove the bonnet for cleaning.
14. Allow sufficient time for the wax to dry. It wax will turn hazy as it dries.
Consult the directions on the wax product.
15. Buff the dry wax with a clean if desired. Move the tool over the workpiece
until the excess dried wax becomes clear.
POLISHING
1. Set the speed and turn the the polisher on.
2. Move the polisher across the waxed surface in light, long strokes. Do not
move in a circle as this will leave swirl marks in the surface.
3. Switch the polisher OFF, then remove the polisher from the workpiece.
4. Remove the bonnet for cleaning.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components.. Only use identical replacement parts when servicing.
3. Only use accessories intended for use with this tool. Follow instructions
for changing accessories.
4. Keep the tool handles or gripping surfaces clean and dry.
5. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
BATTERY MAINTENANCE
Avoid the risk of battery short circuits during transport, storage or disposal by
isolating both terminals with adhesive tape or pack the battery in a plastic bag
or a cardboard box.
1.
The longest life and best performance can be obtained if the battery pack
is charged when the air temperature is between 50 to 86°F (10 to 30°C). Do
9049107 LI-ION CORDLESS ORBITAL POLISHER V1.1
www.princessauto.com / 1-800-665-8685 Page 10