V1.0
Air Engraving Pen
9039595
Visit www.princessauto.com for more information
3
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian Standards
Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection for the
eyes. Eye protection equipment should comply with CSA Z94.3-07 or ANSI Z87.1
standards based on the type of work performed.
2.
Wear protective clothing designed for the work environment and tool.
3.
Wear a NIOSH approved respirator when working on materials that produce
hazardous fumes, dust or particulate matter.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid personal
injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs, alcohol or
medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the moving
parts of a tool. Keep long hair covered or bound.
3.
Never point the air stream or tool at any point of your body, other people or
animals. Debris and dust ejected at high speed can cause an injury.
4.
Serious injury or death may occur from inhaling compressed air. The air stream
may contain carbon monoxide, toxic vapors or solid particles. Never inhale
compressed air directly from the pump or air tool.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from repeated
use) replace strict adherence to the tool safety rules. If you use this tool unsafely
or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific function. Do
not modify or alter this tool or use it for an unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced. Repair or replace
the parts.
3.
Keep hands and fingers away from cutting area. Any body part coming in to
contact with moving parts could cause injury.
AIR TOOL PRECAUTIONS
1.
Use only clean and dry compressed air as a power source. Contaminated or moist
air will gradually damage the tool.
2.
Install an in-line shutoff valve or regulator to allow immediate control over the air
supply in an emergency, even if a hose is ruptured.
3.
Discontinue tool use if it does not work properly or air is leaking.
