9027905
Bench Grinder Pedestal Stand
V1.0
4
For technical questions call 1-800-665-8685
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2. Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3. Ensure that any grinder (or other stationary power tool) mounted to
the pedestal stand is stable and will not tip over. An improperly
mounted or unstable grinder is a work hazard and can lead to
personal injury.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
ASSEMBLING THE STAND
1.
Place the base (#4) on a flat, level surface.
2. Place the support pole (#3) into the centre of the base.
3. Using the hex key (#5), tighten the 2 set screws in the base.
4. Slide the collar of the coolant tray (#2) onto the support pole. Slide it
far enough down so that at least 4 in. of pole is showing above
the collar.
5. Secure the coolant tray in place by tightening the set screw.
