8983496
20 in. Compost/Peat Moss Spreader
V4.0
4
For technical questions call 1-800-665-8685
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
ASSEMBLY & INSTALLATION
1.
Put the cross shaft through the centre hole of grid roller and attach
a washer.
2.
Put the top pallet on the roller.
3.
Use 2 washers and 2 pins on both ends to lock the parts in place.
4.
Assemble the stand on the top pallet using 2 bolts and nuts.
5.
Assemble the bracket handles and the push handle using 1 washer, 1 bolt
and 1 nut in each side.
6.
Assemble the handle assembly on the top pallet using 2 washers, 2 bolts
and 2 nuts.
7.
Assemble 2 plastic caps on the ends of the bracket handle.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
