V4.0
1.45 GPM @ 1,600 PSI Electric Pressure Washer
8976904
Visit www.princessauto.com for more information
5
4. DO NOT attempt to repair damaged or defective high-pressure hoses.
Always replace them.
5. DO NOT repair leaking connections with sealant of any kind. Replace the
O-ring or seal.
6. DO NOT disconnect the high-pressure hose from the pump and spray gun
while the system is pressurized.
7. Always ensure that the spray gun, nozzles, hoses and fittings are correctly
attached before starting the motor.
8. NEVER hold onto the hose or fittings during operation. This can allow
pressurized water to escape and inflict an injury.
9. DO NOT plug this pressure water into a hot water supply. This pressure
washer is designed for cold water use only.
10. Prior to starting the pressure washer in cold weather, be sure ice has not
formed in any part of the equipment.
11. Ensure the pressure washer is not covered during operation to avoid
overheating the motor.
12. This pressure washer is capable of producing high pressure (see
Specifications). To avoid property damage and personal injury, do not
operate the pump with components rated for less than the
working pressure.
13. DO NOT connect the pressure washer to a water source that exceeds
150 PSI.
14. If connecting the pressure washer to a portable water system, ensure the
water system is protected against backflow.
15. NEVER attach or remove wand or hose fittings while system is pressurized.
16. NEVER transport or make adjustments to this unit while it is running.
17. DO NOT allow the high pressure hose to come in contact with any hot part
of the unit. The hose might be damaged, possibly causing it to burst or
leak under high pressure.
18. Shut off the pressure washer if it is leaking water. Discharge all pressure
before tightening fittings or having repair work done by a
qualified technician.
