12V battery. Charge voltage cannot be selected after charging or during
charging.
3.
Switch of Power ON/OFF
Press switch up is ON and press switch down is OFF. Before you press the
switch make sure that the battery charging voltage is selected correctly, it is
very important, if you choose wrong, it will damage the battery or charger.
4.
LED Display information
1.
Power
2.
Connect the Household power 120V AC, Turn on the power switch,
Green light.
3.
Battery recovery
4.
If the battery voltage is too low, Yellow light indicator flash, first to
recovery-charging(Max Amp 1A), it will last for one hour, if the battery
voltage can be recovered to be above 8.5V (12V battery), 4.5V(6V
battery), the charging light will turn on, recovery light will be off,
recovery-charging will turn to normal charging. If it can not be
recovered to normal voltage, dead battery red light will be on, recovery
light will be off.
5.
Charging
6.
When charging, yellow light will be on.
7.
Charged
8.
When charged, green light will be on, disconnect the battery
connection, light will be off.
9.
Wrong connection
10.
When the Red/Black clamp is circuit short or the battery is connected
reversely, or the charger is connected to 12V battery under the
condition of 6V, red light will flash.
11.
Overload
12.
If the internal temperature is above 80 C, the red light will be on, it can
be charged, if above 100 C, the output will be cut, charging light will be
off, this red light will be on.
13.
Dead battery
14.
If the battery can not reach the preset voltage above 8.5V(12V battery),
4.5V(6V battery), after 1 hour recovery, the recovery will stop, red light
will be on to judge it as a dead battery.
5.
Ammeter display battery status
The ammeter indicates the battery capacity by the percentage of battery
