18. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
19. It only can be used for lead-acid rechargeable batteries.
WARNING
•
Warning against recharging non-rechargeable batteries.
•
The battery terminal not connected to the chassis has to be connected first.
The other connection is to be made to the chassis, remote from the battery
and fuel line.
•
The battery charger is then to be connected to the supply mains.
•
After charging, disconnect the battery charger from the supply mains. Then
remove the chassis connection and then the battery connection.
•
Cleaning and user maintenance shall not be made by children without
supervision.
CONTROL BOARD & DISPLAY
1.
Charging Current Switch
When charging the battery according to the battery capacity (refer to the battery
charging current can be recommended in the specification), the current
selection switch to select suitable battery charging current, charging current can
not exceed the maximum current of the battery, so as not to damage the
charger or battery.
2.
Switch of Voltage Selection
Press switch up for charging 6V battery and press switch down for charging
