V4.0
24 in. Drum Fan with DC Motor
8908501
Visit www.princessauto.com for more information
7
a. Position power cords away from traffic areas.
b. Place cords in reinforced conduits or place planks on either side of
the power cord to create a protective trench.
UNPACKING
WARNING! Do not operate the device if any part is missing. Replace the
missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
Contents: • 24 in. Drum Fan with DC Motor • Cradle base
• Wheels
• Feet
ASSEMBLY & INSTALLATION
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an
illustration or image.
1. Align the cradle base with support
brackets attached to the fan body sides.
You may need to flex the parts to make
them align properly. There is a small
hole on each side of the cradle bases.
Make sure those holes face the inside
and in the same direction.
2. Insert each support bracket into the
opening of the cradle base (Fig. 1).
3. Press support bracket into the cradle
base until the spring button protrudes
from the open hole (Fig. 2).
4. Repeat installation of the support
brackets on the opposite side of the fan.
5. Align the two wheel clips to the frame of
the fan and push into place (Figs. 3)
Fig. 2
Fig. 1
Fig. 3
