8908501
24 in. Drum Fan with DC Motor
V4.0
6
For technical questions call 1-800-665-8685
7. This device is only for use on 120 V (single phase) and is equipped with
a three-prong grounded power supply cord and plug. Check with a
qualified electrician if you are in doubt as to whether the outlet is
properly grounded. If the device should electronically malfunction or
break down, grounding provides a low resistance path to carry
electricity away from the user.
a. Never remove the grounding prong or modify the plug in any way,
as this will render the device unsafe.
b. Do not use any adapter plugs.
WARNING! All wiring should be performed by a qualified electrician.
POWER CORD
1. Insert the power cord plug directly to the power supply whenever
possible. Use extension cords or surge protectors only when the
device's power cord cannot reach a power supply from the work area.
a. If an extension cord must be used, the cord must be a minimum 14
AWG and rated not less than 1,875 W.
2. Do not operate this device if the power cord is frayed, damaged or
poorly spliced, as an electric shock may occur, resulting in personal
injury or property damage.
a. Inspect the device’s power cord for cracks, fraying or other faults
in the insulation or plug before each use.
b. Discontinue use if a power cord feels more than comfortably warm
while operating the device.
3. Keep all connections dry and off the ground to reduce the risk of
electric shock. Do not touch the plug with wet hands.
4. Prevent damage to the power cord by observing the following:
a. Do not pull on the cord to disconnect the plug from an outlet.
b. Keep the cord away from heat, oil, sharp edges or moving parts.
c. Never use the cord to carry the device.
5. Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
