V4.0
22 Ton Electric Kinetic Log Splitter
8904807
Visit www.princessauto.com for more information
7
break down, grounding provides a low resistance path to carry
electricity away from the user.
a. Never remove the grounding prong or modify the plug in any way,
as this will render the tool unsafe.
b. Do not use any adapter plugs.
WARNING! All wiring should be performed by a qualified electrician.
POWER CORD
1. Insert the power cord plug directly to the power supply whenever
possible. Use extension cords or surge protectors only when the tool's
power cord cannot reach a power supply from the work area.
a. When operating a tool outside, use an outdoor extension cord
marked W-A or W. These cords are rated for outdoor use and
reduce the risk of electric shock. Canadian electrical codes require
extension cords to be rated type SJT or better.
b. Use in conjunction with a Ground Fault Circuit Interrupter (GFCI).
It is recommended that the GFCI should have a rated residual
current of 30 mA or less.
2. Do not operate this tool if the power cord is frayed, damaged or poorly
spliced, as an electric shock may occur, resulting in personal injury or
property damage.
a. Inspect the tool's power cord for cracks, fraying or other faults in
the insulation or plug before each use.
b. Discontinue use if a power cord feels more than comfortably warm
while operating the tool.
3. Keep all connections dry and off the ground to reduce the risk of
electric shock. Do not touch the plug with wet hands.
4. Prevent damage to the power cord by observing the following:
a. Do not pull on the cord to disconnect the plug from an outlet.
b. Keep the cord away from heat, oil, sharp edges or moving parts.
c. Never use the cord to carry the tool.
d. Place the electrical cord in a position that prevents it from coming
into contact with the tool and getting caught by the workpiece. The
cord should always stay behind the tool.
