8879769
1,000 lb Engine Stand
V1.0
6
For technical questions call 1-800-665-8685
OPERATION
WARNING! Use a lifting device such as a shop crane to position the load to
the engine stand.
1.
Before attaching the load to the engine stand, lock the Head Mounting
Plate (#4) in place with the L-pin (#5).
2. Attach the rear of the engine block to the mounting head securely with
the appropriate bolts (sold separately) according to the vehicle
manufacturer’s specifications.
3.
Make sure that the load is centered and secured to the mounting plate
before removing the lifting device.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when
servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Only use accessories intended for use with this tool.
5.
Make sure that the Head Mounting Plate (#4) and the Mounting Arms (#9)
are clean and clear of dirt, debris, and grease.
6.
Check all of the hardware periodically and tighten if necessary.
7.
Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Clean the outside of the engine stand with a dry, clean, soft cloth and
periodically lubricate all moving parts with a light oil as needed.
