8879769
1,000 lb Engine Stand
V1.0
4
For technical questions call 1-800-665-8685
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2. Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Work on a flat, level surface only.
4.
Never attempt to move a loaded stand across a floor that has cracks or
other obstacles that might impede the movement of the wheels.
5.
Never work directly under a supported engine.
6. Never roll the engine stand without the lock pin securing the mounting
plate in a locked position.
7.
Be sure that the engine is appropriately supported before starting
repairs.
8. Do not exceed the maximum capacity of 1,000 lb. Overloading can
cause damage to, or failure of, the engine stand.
9. Maintain the engine stand in good condition. Keep it clean for the best
and safest performance.
10. Do not allow untrained persons to operate the tool.
11. Make sure there is enough clearance around the engine stand and the
load for movement.
12. Check to ensure that all applicable bolts and nuts are firmly tightened.
