V1.0
5 in. Air Angle Grinder
8843534
Visit www.princessauto.com for more information
5
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2. Do not use the tool if any parts are damage broken or misplaced. Repair or
replace the parts.
3.
This tool will not stop moving immediately. Do not lay the tool down or
leave it unattended until it has come to a complete stop. A part that is
moving could make the tool jump or grab a surface and pull the tool out of
your control.
4.
Always make sure the work surface is free from nails and other foreign objects.
5.
After changing the accessories or making adjustments, make sure the
flange nut and any other adjustment devices are securely tightened. Loose
adjustment devices will be violently thrown.
6. Always check accessories for damage before each use. Damaged
accessories can break during use and cause serious injury.
7.
If you are interrupted when operating the angle grinder, complete the
process and switch off the tool before looking up.
8. Use metal and voltage detectors to locate hidden electric, water or gas
lines. Avoid touching live components or conductors.
9. Only use 5 in. grinder wheels or discs with this tool. Never use this tool
with blades designed for a circular saw.
AIR TOOL PRECAUTIONS
1.
Use only clean and dry compressed air as a power source. Contaminated
or moist air will gradually damage the tool.
2. Install an in-line shutoff valve or regulator to allow immediate control over
the air supply in an emergency, even if a hose is ruptured.
3. Discontinue tool use if it does not work properly or air is leaking. Tag or
mark the tool as ‘defective’ or ‘out of service’ until repaired.
4.
Check the manufacturer’s maximum pressure rating for air tools and
accessories. Compressor outlet pressure must be regulated to never
exceed the maximum pressure rating of the tool (see Specifications).
Exceeding the maximum PSI rating can create a bursting hazard, causing
injury and property damage.
5.
Attach all accessories properly to the tool before connecting the air
supply. A loose accessory may detach or break during operation.
