8785149
Spool Gun Kit for 8785115
V4.0
4
For technical questions call 1-800-665-8685
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the Identification Key are included.
Contents: • Spool gun assembly • Allen wrench • 0.030 Tip
IDENTIFICATION KEY
A Nozzle
B Latch Button
C Wire Compartment
D 5-Pin Trigger Connector
E Trigger
F
Shielding Gas Quick Connect
G Weld Power Cable
ASSEMBLY & INSTALLATION
Letter references in parenthesis (A) refer to the included Identification Key.
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an
illustration or image.
INSTALL THE SPOOL GUN
1. Remove the MIG torch and store it in a safe
location.
2. Open the welding machine’s side panel.
3. Remove the access panel (Fig. 2-1). You may
need to push it out from behind.
4. Carefully slide the gas connector (F) and the weld
power cable (G) through the access opening.
5. Remove the welding machine case to expose the
other side.
6. Push the gas line through the inner-panel opening to the other side of the
welding machine. Pull enough through to reach the back panel.
Fig. 1
Fig. 2
2-1
