V1.0
60 in. Farm Jack
8760662
Visit www.princessauto.com for more information
5
12. Do not push a load off the jack; lower carefully.
13. Before lowering load, ensure that there are no obstructions underneath
and that all people are standing clear.
14. Do not place your hands between the moving components.
15. The jack must have a minimum load of 110 lb (50 kg) to engage the ratchet
system when Iowering the load. Otherwise the large runner and load wiII
drop without resistance and may cause a serious injury.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing
part before operating. Failure to do so could result in a malfunction and
personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
Contents:
• Farm Jack
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
The Farm Jack is preassembled.
OPERATION
WARNING! Do not place any part of your body under the load without jack
stands or a support structure capable of handling the load in place. The jack is
not designed to maintain heavy loads for long periods of time
WARNING! Always have an escape route in place should the load become
unstable or slip off the jack.
RAISING A LOAD
1.
Place the jack beneath the load.
2.
Position the large runner (#19) saddle slightly
below the contact point of the load.
3.
Lift the reversing latch (#17) to the UP position
and ensure it is locked in place, with the reversing
switch’s tooth firmly engaged in the notch on the
reversing latch. Refer to Fig. 1.
Fig. 1
