V4.0
12 in. Confined Space Air Ventilator
8663932
Visit www.princessauto.com for more information
7
If the GFCI faults or trips, follow these steps:
1.
Switch the unit off and unplug the power cord.
2.
Determine the cause of the problem (contact with water, damaged power
cord) and resolve.
3.
Plug the power cord.
4.
Push the restart button on the GFCI faceplate.
5.
Switch the unit on. If the fan does not start, refer to Troubleshooting.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. The fan has sealed bearings and do not need lubrication.
4. Only use accessories intended for use with this tool.
5. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
1. Wipe the housing and the safety screens with a clean, moist cloth. Do not
use solvents.
2. Use compressed air or a vacuum to remove lint and other debris from the
motor, inlet and fan blade.
3. Do not use a pressure washer or a water hose to clean the unit.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
