8661621
3 in. Gas Water Pump
V4.0
12
For technical questions call 1-800-665-8685
3. Remove the primer plug from the top of the pump and flush the internal
components with clean water.
4. Reinstall the plugs and tighten securely.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for electronic
devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Possible cause(s)
Suggested solution(s)
Motor does
not run.
1. Disconnect switch is off.
2. Fuse is blown.
3. Starting switch
is defective.
4. Pressure switch contacts
are dirty.
1. Turn disconnect switch on.
2. Replace fuse.
3. Disconnect power, replace
starting switch.
4. Disconnect power and file
contacts with emery board or
nail file.
Fig. 10
Summary of Contents for 8661514
Page 28: ......
