8644171
12V Chainsaw Sharpener
V 4.0
2.
A. Lock the motor shaft with a spare stone.
B. Loosen the lock nut.
3.
A. Install stone.
NOTE: There should be 1/8 in. (3mm) of the shank
sticking out from the chuck.
B. Tighten lock nut.
C. Remove spare stone.
4.
Loosen adjusting screw.
5.
Position guide plate.
6.
Tighten the adjusting screw.
OPERATION
1.
With the sharpener turned off (the red stripe is
not visible), connect the battery.
2.
Sharpen the chain at angles recommended by
the chain manufacturer.
CARE AND MAINTENANCE
1.
Maintain a tool with care. A tool in
good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components
periodically. Repair or replace
damaged or worn components.
DISPOSAL
Recycle a tool damaged beyond repair at the
appropriate facility.
2
For technical questions call 1-800-665-8685
