V 4.1
9A Electric Mixer
8642969
CLEANING
Once the mixing process has been completed, submerge the mixing paddle in a
container of clean water and turn on the tool. Wipe any remaining substance off of the
mixing paddle with a soft cloth. Use a dry cloth to remove any remaining moisture on
the mixing paddle.
Wipe any substance that has splashed on the tool with a soft cloth. Do not allow any
water to enter the tool.
CAUTION! Do not use any cleaning agents or solvents to clean the tool or
mixing paddle.
Clean the ventilation slots (5) regularly with a brush or compressed air.
LUBRICATION
All bearings in this tool are lubricated with a sufficient amount of high grade
lubricant for the life of the tool under normal conditions. Therefore, no further
lubrication is required.
NOTICE! NEVER use a penetrating oil to lubricate the tool. Penetrating oil may
act as a solvent that will break down the grease and cause the tool to seize up.
STORAGE
Store the tool in a cool dry place, out of the reach of children.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
Visit www.princessauto.com for more information
11
