8642969
9A Electric Mixer
V 4.1
NOTICE! Be aware of the forces that occur as a result of
jamming. Hold the tool firmly with both hands and take a
secure stance.
4. To make the mixing paddle (10) stop rotating, release
the trigger switch (2).See figure 5.
NOTICE! Switch the tool off only when the mixing paddle is in the mixing container.
Do not remove the mixing paddle from the container while the tool is running.
TRIGGER LOCK
The trigger (2) can be locked in position
with the trigger lock button (3).
1. Squeeze the trigger (2) until the desired
speed of rotation has been achieved.
2. With the trigger still squeezed, press
the trigger lock button (3) to lock the
trigger (2) in place and maintain the
speed of the mixing paddle (10)
rotation. See figure 6.
3. Squeeze the trigger (2) again to release
the trigger lock (3) and turn off the tool. See figure 7.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to control
and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or worn
components. Only use identical replacement parts when servicing.
3. Only use accessories intended for use with this tool.
4. Keep the tool handles clean, dry and free from oil/grease at all times.
5. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An improperly
repaired tool may present a hazard to the user and/or others.
CAUTION! Disconnect the tool from the power source before performing any
maintenance or cleaning.
10
For technical questions call 1-800-665-8685
