8639106
Metal Punch Kit
V4.0
6
For technical questions call 1-800-665-8685
5. Disassemble punch by turning the draw stud
counterclockwise while holding the punch. Tip
the die to drop out the split slugs (Fig. 4).
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good
condition is efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Fig. 4
