Air Reciprocating Saw
8
For technical questions call: 1-800-665-8685
8435992
V 2.1
AIR COMPRESSOR
Ensure the compressor used with the tool can supply the required Cubic Feet per Minute at the required PSI
(see Specifications).
1. Use proper size and type of air pressure line and fittings.
2. Use only clean, dry, regulated compressed air at the rated range as marked on the tool.
CAUTION! Do not use an air source besides an air compressor to power this tool.
3. Always use an air regulator, an in-line filter and a moisture trap in your compressed air system. These
accessories will increase the tool’s life and keeps the tool in good working condition.
See the diagram for
recommended components of an air line.
4. Avoid using an air hose that is too long. The longer the hose, the lower the pressure that reaches the tool,
possibly causing it to cease functioning. As well, a longer hose can become a tripping hazard.
5. Air tool CFM consumption ratings are based upon a 25% duty cycle. If you require continuous duty, a larger
compressor is required.
