3
For technical questions call: 1-800-665-8685
V 2.0
8416331
1/2 in. Hammer Drill
SPECIFICATIONS
Voltage Rating
120 V, 60 Hz AC
Amperes
6.3 Amp
No Load Speed
2,800 RPM
Chuck
1/2 in. Keyed
Maximum Drilling Capacity in Metal
3/8 in. (10 mm)
Impact rate
0 to 44,800 BPM
SAFETY
IMPORTANT SAFETY PRECAUTIONS
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this
tool, make sure they are aware of all safety information.
WORK AREA
1. Keep your work area clean and well lit.
Cluttered and dark areas invite accidents.
2. Operate in a safe work environment.
Do not use machines or tools in damp or wet locations. Do not expose
to rain. Do not use power tools in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area.
Do not let them handle tools or extension
cords. No one should be in the work area if they are not wearing suitable protective equipment.
4. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or fumes.
5. Store unused equipment.
When not in use, tools must be stored in a dry location to prevent rust. Always
lock up tools and keep them out of reach of children
Safety Icons
Wear suitable
eye protection.
Use of protective gloves is
recommended.
Double insulated.
Summary of Contents for 8416331
Page 2: ......