18V Cordless Drill
7
For technical questions call: 1-800-665-8685
8390270
V 2.0
ABOUT THE CHARGER
• Disconnect the feeding before connecting or disconnecting the battery
• The charger must be used only with rechargeable battery.
• Do not expose the charger to rain or water
• The charger must be used with the battery and with the adaptor
OPERATION
Inserting battery
• To center position (lock-out). Insert charged battery in handle and secure with battery securing clip.
The spring must snap into place.
SWITCHING ON AND OFF
Set rotation direction switch 5 to desired position
• To switch on: Press ON/OFF switch 6.
• To switch off: Release ON/OFF switch 6.
SWITCHING DIRECTION OF ROTATION
Change direction of rotation only when machine is not in operation.
Set rotation direction switch either to R (clock wise) or to opposite side
(counter-clock wise). When the ON/OFF switch is activated, rotation direction
switch is locked. Counter-clock wise rotation is suitable for loosening screws
and nuts.
SCREWS
Clamp screwdriver blade directly into the chuck. Use additional universal bit holder (accessory) when using
screwdriver attachments (bits).
TORQUE CONTROL SETTING
Four different settings can be selected with torque INCREASE control ring:
If the correct setting has been chosen, an override clutch opens once the screw has been turned flush into
the material. When removing screws, select a highest setting or set to drill symbol. The proper settings a best
determined in practical trials.
Right
Left
High setting e.g. large screws, hard materials
Low setting e.g. small screw soft materials