7-1/4 in. Circular Saw with Laser
Visit www.princessauto.com for more information
7
8340481
V 3.03
LASER PRECAUTIONS
WARNING! Laser radiation risk - do not stare into the beam. Do not deliberately aim the beam at
another person. Adjustments to the laser’s performance, or use of the laser in a manner other than
that specified in this instruction manual, may result in hazardous radiation exposure.
1. Laser radiation can be reflected from the work surface - do not stare into the reflected
laser light.
2. Avoid exposure. Laser light is emitted from the housing’s front aperture - do not stare into
the aperture.
3. Do not disassemble the laser.
4. Operate the laser only while using the tool. Turn off the laser after use.
TOOL USE AND CARE
WARNING! Do not use the tool if the trigger switch does not function properly. Any tool that cannot
be controlled with the ON / OFF switch is dangerous and must be repaired.
1. Use the correct tool for the job. Maximize performance and safety by using the tool for its
intended task.
2. This tool was designed for a specific function.
Do Not:
a.
Modify or alter the tool, all parts and accessories are designed with built-in safety
features that may be compromised if altered.
b.
Use the tool in a way for which it was not designed.
3. Avoid unintentional starts. Be sure the trigger switch is in the OFF position when not in use
and before connecting the tool to any power source.
4. Remove adjusting keys and wrenches. Check that adjusting keys and wrenches are removed
from the tool before connecting it to any power source. An adjusting key or wrench that is
left attached to a rotating part of the tool increases the risk of personal injury.
UNPACKING
1. Carefully remove the tool from the package.
a.
Retain the packing material until you have carefully inspected and satisfactorily
installed or operated the tool.
2. Make sure that all the items in the parts list are included.
3. Inspect the parts carefully to make sure that the tool was not damaged during shipping.
WARNING! If any parts are missing, do not operate the tool until the missing parts are replaced.
Failure to do so could result in serious personal injury.
