3
For technical questions call: 1-800-665-8685
V 1.5
8336232
Multi-Purpose
Oscillating Tool
SPECIFICATIONS
Model
8336232
Rated Input
120V~AC, 60Hz, 1.6A
No load speed
21,000 OPM
Includes: Oscillating Tool, Hook & Loop Sanding Pad, Assorted Sandpaper, Rigid Scraper Blade, 1-3/16” (30 mm)
E-Cut (Flush Cut) Saw Blade, 3” Wood & Drywall Saw Blade, and Wrench
IMPORTANT SAFETY PRECAUTIONS
WARNING! The operation of any power tool can result in foreign objects thrown into your eyes, which can
result in severe eye damage. Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply
with ANSI Z87.1.
WARNING! Read and understand all instructions before using this tool. Failure to follow all instructions may
result in electric shock, fire and/or personal injury. Keep this manual for the safety warnings and precautions,
operating, inspection and maintenance instructions. When using this tool, basic precautions should always
be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when this manual
refers to a part number, it refers to the parts list included.
WORK AREA
1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use in damp or wet locations. Do not expose to rain. Do not use
in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area. Distraction can cause you to lose control.
Do not let them handle tools, hoses or extension cords. No one should be in the work area if they are not
wearing suitable protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always
lock up tools and keep them out of reach of children.
