Specifications
Model: 8069676
Rated Voltage: 120V~
Rated Frequency: 60 Hz
Rated current: 6.3 Amp
No load speed: 0 to 2,800 RPM
Bit: 1/2"
Double insulated
Hammer Drill Safety
• Hold tool by insulated gripping surfaces when performing an operation
where the cutting tools may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal parts of the tools
“live” and shock the operator.
• This tool is supplied with a fitted plug. Do not use an extension cord or
replacement. Have damaged or worn power cord and strain relievers
replaced immediately with same type and size wire at qualified service
facility
• Never wearing gloves while working with the drill
• For your own safety, wear safety glasses or goggles.
• Do not use in damp or wet locations. Do not operate tool in explosive
atmosphere, such as in the presence of flammable liquids, gases or dust.
Power tool creates sparks, which may cause fires or explosions
• Replace worn brushes promptly to prevent motor damage
8069676manual 4/11/05 10:33 AM Page 5