Problem
a. Worn bumper or
damaged spring
b. Dirt in front plate
c. Dirt or damage prevents
fasteners from moving
freely in magazine
d. Worn or dry O-ring on
piston or lack of
lubrication
e. Cylinder cover seal
leaking
a. Incorrect or damaged
fasteners.
b. Damaged or worn driver
guide.
c. Magazine or nose screw
loose.
d. Magazine is dirty.
Solution
a. Repalce bumper or
pusher spring
b. Clean drive channel on
front plate
c. Magazine needs to be
cleaned
d. O-ring needs to be
replaced and/or
lubricated.
e. Replace sealing washer.
a. Change and use correct
fastener.
b. Check and replace the
driver.
c. Tighten the magazine.
d. Clean the magazine
Symptom
6. Tool skips
fasteners
7. Tool jams
Summary of Contents for 8052409
Page 7: ...Parts List ...
