Power Fist 8011796 User Manual Download Page 5

3/8 in. Right Angle Air Drill

5

Visit www.princessauto.com for more information

8011796

V 2.7

VIBRATION PRECAUTIONS

1.  This tool vibrates during use. Repeated or long-term exposure to vibration may cause 

temporary or permanent physical injury, particularly to the hands, arms and shoulders.

2.  Anyone using vibrating tools regularly or for an extended period should first be examined by 

a doctor and then have regular medical check ups to ensure medical problems are not being 

caused by or worsened from tool use.

3.  If you feel any medical symptoms related to vibrations (such as tingling, numbness, and white 

or blue fingers), seek medical attention as soon as possible.

4.  DO NOT use this tool if one of the following applies:

a.  Pregnant

b.  Impaired blood circulation to the hands

c.  Past hand injuries

d.  Nervous system disorders

e.  Diabetes

f.  Raynaud’s Disease

5.  Do not smoke while operating the tool. Nicotine reduces the blood flow to the hands and 

fingers, increasing the risk of vibration-related injury.

6.  Wear suitable gloves to reduce the effects of vibration.

7.  Use the tool with the least amount of vibration, when there is a choice between 

different processes.

8.  Do not use for extended periods. Take frequent breaks when using this tool.

9.  Let the tool do the work. Grip the tool as lightly as possible (while still keeping safe control 

of it).

10.  To reduce vibrations, maintain the tool as explained in this manual. If abnormal vibrations 

occur, stop using this tool immediately.

SPECIFIC SAFETY PRECAUTIONS

1.  Before using this tool, make sure you know the area/material you are working in/on. Make sure 

you do not accidentally puncture pipes, pressurized containers or electrical cables.

Summary of Contents for 8011796





























Reviews: