Specifications
• 18 volt
• 1.2 amp
• 3/8" keyless chuck
• Speed: 0-400 RPM, 0-1,100 RPM
• Torque: 16 positions
• 1 hour charging time
Speed switch
This switch allows you to choose the
proper speed for your job. Use the low
speed (1) for bricks, when beginning
drilling without preliminary punching,
when drilling metal or plastic, inserting
screws, drilling ceramics or mixing paint. The high speed (2) is
recommended for drilling wood and derivatives.
Before starting the drill, check that the selector is in the correct
position. Only adjust the speed when the drill is stopped, otherwise
the gear mechanism could be damaged.
Speed switch
Torque adjusting knob
Forward/
Reverse switch
On/Off switch
Battery ejection
button
Battery Pack