7
4. ASSEMBLY INSTRUCTIONS
The washer is shipped in a carton and requires assembly before it can be used. Follow this procedure when
assembling:
1. Select an area that is firm and dry with sufficient space to work around all sides of the unit.
2. Remove all components from the carton.
3. Refer to your model assembly below. See the referenced pages for exploded assembly views.
NOTE: Use pipe sealant or Teflon tape on all threaded connections to eliminate leaks.
4.1 ASSEMBLY FOR ITEM 8102477 (ref. pages 28-29)
1. Install wheels (10) and axle (5) to base (1) using cotter pins (12) and washers (11).
2. Install rubber plug (9) on base (1).
3. Install handle (4) using bolts (13) and nuts (14).
4. Install engine (2) on base (1) using bolts (21) and nuts (14).
5. Assemble coupler (24) on hose (29).
6. Assemble spray gun (7) on free end of the hose (29).
7. Assemble wand (8) to spray gun (7).
8. Assemble hose/coupler (29/24) to the discharge end of the pump (3).
9. Install quick-change nozzle (26) to wand (8).
10. If you are using detergent:
a) Install clear hose (30) to chemical injector on pump (3).
b) Install strainer (18) at free end of clear hose (30).
c) Insert strainer end into detergent container (not included).
11. Check that all parts are installed properly and are securely tightened.
4.2 ASSEMBLY FOR ITEM 8038317 (ref. pages 30-31)
1. Install wheels (11) and axle (8) to frame (1) using cotter pins (13) and washers (15).
2. Install rubber tip (7) on base (1).
3. Install engine (2) on base (1) using bolts (9) and nuts (10).
4. Install handle frame (5) on base frame (1) using bolts (9) and nuts (10).
5. Install chemical tank holder (6) on frame handle (5) using bolts (12) and nuts (10).
6. Assemble male quick coupler (23) to the spray gun (20).
7. Assemble wand (21) to spray gun (20).
8. Assemble female quick disconnect coupler (24) on hose (34).
