POWER ELECTRONICS
NB City
CABLE ACCESS AND CONNECTIONS
31
EN
Ethernet cable connection
In the recharging posts, the customer must also carry out the communications connection. In the upper
part of the device there is an Ethernet 5-input switch, it must be connected in the lower port.
The following image shows the connection to be made, using an ethernet cable:
If the equipment does not include this switch, the cable will be connected to the ethernet connector of
the main control card.
WARNING
Before opening any door, the equipment must be completely isolated, without any tension. Be
sure to follow the insulation guidelines and all safety instructions indicated in the "
section. Please use all the indicated PPE.
Otherwise, you may get an electric shock.
