Power Electronics Freesun String Supervisor FSITG0012AI, Getting Started Manual

Page: 8 / 23

FREESUN SERIES
– String Supervisor
POWER ELECTRONICS
6
SAFETY INSTRUCTIONS
CAUTION
Install the device on a non-flammable surface. Do not place flammable material nearby.
Otherwise fire could occur.
Disconnect the input power if the device gets damaged.
Otherwise it could result in a secondary accident or fire.
Do not apply power to a damaged device or to a device with parts missing even if the installation
is complete.
Otherwise you may get an electric shock.
Do not allow lint, paper, wood chips, dust, metallic chips or other foreign matter into the device.
Otherwise fire or accident could occur.
WARNINGS
RECEPTION

The STRING SUPERVISOR is carefully tested and perfectly packed before leaving the factory.

In the even of transport damage, please ensure that you notify the transport agency and POWER
ELECTRONICS: 902 40 20 70 (Interna34 96 136 65 57) or your nearest agent, within
24hrs from receipt of the goods.
UNPACKING

Make sure model and serial number of the String Supervisor are the same on the box, delivery
note and unit.
RECYCLING

Packing of the equipments should be recycled. For this, it is necessary to separate different
materials included (plastic, paper, cardboard, wood, ...) and deposit them on proper banks.

Waste products of electric and electronic devices should be selectively collected for their correct
environmental management.