Power Electronics Freesun String Supervisor FSITG0012AI, Getting Started Manual

Page: 7 / 23

POWER ELECTRONICS
FREESUN ACCESSORIES
– String Supervisor
SAFETY INSTRUCTIONS
5
E
N
G
L
I
S
H
SAFETY INSTRUCTIONS
IMPORTANT!

Read this manual carefully to maximise the performance of this product and to ensure its safe
use.

Power Electronics accepts no responsibility or liability for any and all damage resulting from
inappropriate use of the equipment.

The information contained in the installation guide must be observed when installing the String
Supervisor

In this manual, safety messages are classified as follows:
WARNING
Do not remove the cover while the power is applied or the unit is in operation.
Otherwise electric shock could occur.
Do not run the device with the front cover removed.
Otherwise you may get an electric shock due to the high voltage terminals.
Do not remove the cover except for periodic inspections or wiring, even if the input power is not
applied.
Otherwise you may access the charged circuits and get an electric shock.
Operate the switches with dry hands.
Otherwise you may get an electric shock.
Do not use cables with damaged insulation.
Otherwise you may get an electric shock.
Do not subject the cables to abrasions, excessive stress, heavy loads or pinching.
Otherwise, you may get an electric shock.