TRANSMITTER FUNCTION & FEATURES
1. Grille: Protects the cartridge and help reducing the breath
sounds and wind noise.
2. LCD Information Display: Show the transmitter frequency
channel eel.
3. Up Function Button: Sets channel data.
4. Down Function Button: Sets channel data.
5. Power and Audio Mute Switch.
6. Battery Cover: Open it to install the battery.
1. Power and Audio Mute Switch.
2. Antenna: Transmit the RF signal of transmitter.
3. Bell Clip: Attach the transmitter to the belt.
4. Audio Input Jack: It’s suitable for lavaliere
system/headset system.
5. Low Battery Indicator: Red light glows when it’s lack
of power and should renew the battery.
6. LCD Information Display: Show the transmitter
frequency channel ect.
7. Gain Adjusting Volume: Adjust the transmitter audio
input gain.
8. State Setting Switch: Set the using state of lavaliere
system(L)/headset system(H).
9. Up Function Button: Sets channel data.
10. Down Function Button: Sets channel data
.
SYSTEM CONNECTIONS
1. Receiver Power Connection: Connect the AC adapter inlo the DC power connector on the
back of the receiver. Plug the AC adapter into a AC 230V~240VAC/50Hz outlet.
2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown as below)
3. Audio Connection: Connect the audio cable from the audio output on the receiver to the
input on your amplifier equipment.
