Power Dynamics 173.420, Instruction Manual

Page: 4 / 16

4
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1. Microphone Connector
Attach the microphone (gooseneck) to this
connector. Line up the male-female pins and slots
accordingly and screw the locking cap.
2. Talk
Press to turn the microphone on/off.
3. DC input
Connect the provided adapter with this slot to
power the microphone.
4. Chime volume
Turn to adjust the chime sound volume.
5. Microphone volume
Turn to adjust the microphone (speech) volume.
6. Balanced out
XLR balanced output socket.
7. Mix out
6.3mm unbalanced output jack.
OPERATION
Press the talk button to allow speaking to be emitted. The button will start to blink, a chime sound will be aired. After the chime
sound, the button will light up continuously. The LED lighting ring will also be on to indicate you
’re “on air”. While in this state,
the microphone can be used to emit speech.
Press the button once more to send out a chime sound again. The microphone will be turned off. Both the talk button and LED
lighting ring will be off.