Power Craft PTS 15/250, User Manual & Warranty

Page: 12 / 36

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244
Web Support: WWW.EINHELL.CO.UK
Model Number: PTS 15/250
12
A ss embling the ba s e Frame
(Fig. 5/6)
• Turn the saw upsi d e d own an d pla c e it on the floor.
• Use the hex s c rews an d nuts to fasten the four le g s (40)
loosely to the saw.
• The two le g s (40) with two holes lyin g upon ea c h other on
the lower si d e nee d to b e mounte d so the holes are on the
b a c ksi d e of the ma c hine. Mount the a dd itional stan d b ar
(44) on these holes. Warnin g ! Both a dd itional stan d b ars
(44) have to b e mounte d on the b a c ksi d e of the ma c hine.
• Now fasten the lon g itu d inal struts an d c ross struts (41) as
well as the four c enter struts (42) loosely to the le g s.
• Be sure to se c ure the hex s c rews an d nuts only loosely.
Important: The lon g er struts have to b e use d on the si d es.
• Now mount the ru bb er feet (43) on the le g s an d turn the
saw to g ether with the b ase frame so that it stan d s upri g ht
on the floor.
• Finally, se c ure all the s c rews an d nuts on the b ase frame so
that they are ti g ht (Fi g . 6).
Table wi d th exten s ion an d length exten s ion
(Fig. 7/8)
• Use the s c rews an d nuts to fasten the ta b le wi d th
extension an d len g th extension (35/36) loosely to the saw
ta b le (1) (Fi g . 7).
• Sc rew the supports (27) loosely onto the saw housin g an d
onto the ta b le wi d th extension or len g th extension (short
supports for the wi d th extension, lon g supports for the
len g th extension).
• Ali g n the ta b le wi d th extension an d len g th extension level
with the saw ta b le (1).
• Finally, ti g hten all s c rews. (Fi g .8)
Fitting/removing the s aw bla d e guar d
(Fig. 2/3/10)
• Mount the saw b la d e g uar d (2) on the splitter (5) so that
the s c rew fits throu g h the hole (44) in the splitter.
PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 13