background image

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PRT-150

21

Disconnect the machine from the mains before carrying out
cleaning and maintenance work. 

This machine has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon
proper machine care and regular cleaning.

Cleaning

Regularly clean the machine housing with a soft cloth, preferably after each
use. Keep the ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.

Lubrication

This machine needs no additional lubrication.

Faults

Should a fault occur, please contact the address on the warranty card. On the
back page of this manual you find an exploded view showing the parts that
can be ordered. 

Environment

To prevent damage during transport, the appliance is delivered in a solid
packaging which consists largely of reusable material. Therefore please make
use of options for recycling the packaging.

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PRT-150

04

Machine specifications

Technical specifications

Product information

Fig. 1

Voltage

230 V~

Frequency

50 Hz

Main table size

455 x 330 mm

Extension table size (with extension wings)

855 x 330 mm

Extension  wing size

200 x 330 mm

Max router base plate diameter

155 mm

Weight

6 kg

Nut

Locking knob

Flat washer

Big flat was-

her

Philips head

screw

Elastic

washes

Hex head bolt

Allen hex head

bolt 

Coach bolt

Maintenance

Summary of Contents for Power Craft PRT-150













Reviews: