background image

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft 
Model Number: PLS-52

15

Maintenance

Troubleshooting

• Motor stops working

• Machine fails to split

logs

• The log pusher moves

jerkily, making unfa-
miliar noise or vibra-
ting a lot

• Oil is leaking around

cylinder ram or at
other points

• Motor has been over-

loaded 

• Log is positioned in-

correctly

• The size or hardness of

the log exceeds the ca-
pacity of the machine

• Wedge cutting edge is

blunt

• Oil is leaking from the

machine

• Unauthorized adjust-

ment was made on
max. pressure limiting
screw

• Lack of hydraulic oil

and excessive air in the
hydraulic system

• Air sealed in hydraulic

system while opera-
ting

• Bleed screw is not

tightened before mo-
ving the log splitter

• Oil drain bolt with dip-

stick is not tightened

• Hydraulic control val-

ve assembly and/or se-
al(s) are worn

• Allow the motor to

cool down / contact an
authorized service
centre

• Push the overload pro-

tector (Fig. 1: 16).

• See chapter 4 "Placing

the log on the splitter"

• Reduce the log size be-

fore splitting it on the
log splitter

• See chapter 5 "Sharpe-

ning the wedge"

• Locate the leak and

contact an authorized
service centre

• Contact an authorized

service centre

• Check oil level for pos-

sible oil filling

• Contact an authorized

service centre

• See chapter 3 "Bleed

screw"

• Tighten the bleed

screw

• Tighten the oil drain

bolt with dipstick

• Contact the dealer

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft 
Model Number: PLS-52

06

Safety instructions

The following symbols are used in these instructions for use:

Read the instructions carefully.

Conformity with the relevant EU safety directives.

Danger of life and risk of injury as well as risk of damage to the
machine in case of non-adherence to the safety instructions in
these instructions of use.

Danger of electric shock.

Faulty and/or discarded electrical or electronic machines have to be
collected at the appropriate recycling locations.

Wear eye protection.

Wear protective gloves.

Wear safety boots.

Keep bystanders away.

Remove the plug from the mains socket.

Danger - Keep hands away from moving parts.

Summary of Contents for PLS-52











Reviews: