CHARGING THE BATTERY
Fig. G.
The PCCL-18 charger is only suitable for charging type
PCCB-18 batteries.
•
Place the battery (5) in the battery charger (11) as the
diagram indicates. Make sure that the poles are
placed correctly as indicated by the + and -.
•
Place the battery charger's plug in the socket. The red
speed charging indicator (12) will light up.
•
Charging is complete as soon as the green indicator
(13) for the minimum charge lights up. The battery is
ready for use.
Only use the battery charger in a dry environment
at a temperature between 10°C and 40°C.
The battery of your drill is uncharged whilst it works.
Before using it for the first time you should charge it for 1
to 2 hours to achieve maximum performance.
The battery's full capacity is reached after charging / using
it for 4 to 5 cycles.
MAINTENANCE
Make sure that the machine is not live when carry-
ing out maintenance work on the motor.
These machines have been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to pre-
vent overheating of the engine.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt. If the dirt does not come off use a soft
cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These sol-
vents may damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please con-
tact your local Powercraft dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local Powercraft-
dealer. Here they will be disposed of in an environmen-
tally safe way.
NiCd cells are recyclable. Take them to your local Pow-
ercraft-dealer or a local recycling station. The collected
battery packs will be recycled or disposed of in an envi-
ronmentally safe way.
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
We declare under our sole responsability that this
product is in conformity with the following
standards or standardized documents
EN-774, EN50260-1,
EN55014-1, EN55014-2,
EN60335-2-29, EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37/EEC,
73/23/EEC,
89/336/EEC
from 01-05-2002
Im Park 20
50996 KÖLN BRD
E. Kok
Quality department
CE
ı
DECLARATION OF CONFORMITY
(UK)
Powercraft
3
HEDGE TRIMMER / GRASS SHEAR
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1 Hedge
trimmer/grassshear
1 Battery, type PCCB-18
1 Battery charger, type PCCL-18
1 Hedge trimmer blade
1 Grass shear blade
1 Case
1 Instructions
1 Guarantee
card
Check the machine, loose parts and accessories for
transport damage.
PRODUCT INFORMATION
Fig. A
1 Battery pack
2 Battery release tab
3 Lock-off button
4 Trigger switch
5 Shear blade
6 Hedge trimmer blade
EXPLANATION OF SYMBOLS
In accordance with essential applicable safety stan-
dards of European directives.
Class II machine – Double insulation – You don’t
need any earthed plug.
In case of failure, the transformer is not dangerous.
130 Degrees thermal quillshaft..
Utiliser à l’intérieur seulement.
Cadmium : recyclable material.
Cadmium : do not throw away.
Risk of material damage and/or physical injury.
Risk of an electric shock.
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or dam-
age to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
Always check that the power supply corresponds to the
voltage on the rating plate. Also check that your mains
voltage corresponds to the input voltage of the battery charger.
The battery charger is double insulated in accordance
with EN 60335; therefore no earth wire is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Cd
Cd
130 °C
Voltage
| 18 V—
---
Voltage of battery charger
| 230 V~
Frequency of battery charger
| 50 Hz
Battery performance
| 1.5 Ah
Charging time
| 1.5 hr
No load speed
| 1600/min
Weight (incl. battery)
| 3.20 kg
Hedge Trimmer
Dimensions | 200
mm
Lpa (Sound pressure level)
| 84.6 dB(A)
Lwa (Sound power level)
| 97.6 dB(A)
Vibration value
| 1.0 m/s
2
Grass Shear
Dimensions | 100
mm
Lpa (Sound pressure level)
| 81.1 dB(A)
Lwa (Sound power level)
| 94.1 dB(A)
Vibration value
| 1.3 m/s
2
6
Powercraft
