assembly
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PCD-2400IK
12
Always remove the battery before attaching accessories.
Attaching and removing drill bits
Fig. B
In addition to drilling, the device can also function as a screwdriver and
accommodate bits with hexagonal shafts.
• Loosen the drill chuck (7) by turning it by the flanging (B).
• Insert the shaft of the drill bit into the receptacle of the drill chuck.
• Tighten the drill chuck until the shaft of the drill bit is firmly in place.
• Loosen the drill chuck if you want to change the drill bit.
• Before connecting the charger, ensure that the outer surface of the
battery block or tool is clean and dry.
Before connecting the charger, ensure the surface of the battery and
tool are clean and dry.
7
B